9211 Cockleshell Court, Suite B2, Bonita Springs, FL
(239) 676-5934
Mon. - Fri. 8:00 am - 5:00 pm | Sat. 9:00 am - 2:00 pm

DUAL H-BRIDGE MODULE

$420.99

The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.

Add To Wishlist

Description

The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.

Voltage range: 6V – 28V (12V and 24V automotive installations)
Output current: 10A continuous, 30A peak
4 analogue (0-5V) / digital (35Hz – 200Hz PWM) inputs
Output PWM: 12bit 3.9kHz
The CAN H-Bridge device can be used to supply protected low side (GND) or high side (VBat) supply independently to each of 4 outputs for bidirectional DC motor control. Low side outputs can be PWM modulated on per-bridge basis.

Common use cases are:

Power windows
High current electronic throttle body amplifier
The dual H-Bridge device must be programmed using a CAN interface. The ECUMaster USB to CAN, Kvaser, or Peak PCAN may be used.

What’s in the box?

Can H-Bridge Module
24 Position connector with terminals

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DICorse
These cars have been our passion since 1971. We carry many hard to find quality OE replacement parts and top of the line aftermarket parts in stock!
Contacts

(239) 676-5934

Mon. - Fri.8:00 am - 5:00 pmSaturday-9:00 am - 2:00 pm

DICorse
DICorse.com ©2021 | All Rights Reserved.

X